In the packaging and advertising industries, precision cutting of printed materials is critical. Whether you’re cutting stickers, paper boxes, corrugated cardboard, or KT board, CCD camera cutting software ensures that cuts follow printed marks exactly – even on pre‑printed sheets.
This guide covers how the software works, compatible materials, required hardware, cutting tools, and machine recommendations.
Target Markets & Materials
| Market | Typical Materials |
|---|---|
| Packaging | Printed cartons, gift boxes, corrugated cardboard, paper boxes |
| Advertising | Vinyl stickers , KT board, foam board |
The software works of CNC cutting machine with both sheet materials (e.g., cardboard, KT board) and roll materials (e.g., roll‑fed vinyl).
How It Work
- CCD industrial camera captures the material – The camera detects printed registration marks or the edge of a printed pattern.
- Software aligns the cut path – The cutting tool follows the detected image precisely.
- Cutting modes – Depending on the tool selected, the machine can cut through the material, perform kiss cutting (top layer only), or crease for folding.
Common terms:
- Edge cutting – Follows the printed contour.
- Kiss cutting tool – Cuts only the top layer (e.g., vinyl liner without cutting the backing paper).
Required Hardware
| Component | Function |
|---|---|
| CCD industrial camera | Reads printed registration marks or pattern edges. |
| Oscillating cutting tool | Through‑cutting of cardboard, KT board, paper boxes. |
| Kiss cutting tool | Cuts only the top layer of adhesive vinyl or similar materials. |
| Double tool holder | Holds both oscillating knife and kiss cutter – switches automatically. |
| Creasing wheel | Creates fold lines on paper boxes and cartons. |
Cutting Tools & Their Use
| Tool | Function | Best For |
|---|---|---|
| Oscillating cutting tool | Through cutting (full thickness) | Cardboard, corrugated board, KT board, paper boxes |
| Kiss cutting tool | Top layer only | Roll‑fed vinyl stickers, adhesive paper |
| Creasing wheel | Creates fold lines without cutting | Paper boxes, gift boxes, folding cartons |
| Double tool holder | Holds oscillating knife + kiss knife together | Jobs that require both through cuts and kiss cuts |
Machine Recommendation
For Paper Boxes & Cardboard (Sheet Materials)
- Typical material size: around 1.2m × 2.4m (standard for paper boxes)
- Equipped with oscillating knife + creasing wheel
- CCD camera for printed carton alignment
For Vinyl stickers
- Designed for cutting printed vinyl stickers from rolls
- Uses kiss cutting + CCD camera to follow printed contours
When to Use Kiss Cutting Tool
Kiss cutting is required when you need to cut only the top layer of the material. Examples:
- Sticker sheets – cut the vinyl but leave the backing paper intact.
- Multi‑part labels – separate parts without cutting through the liner.
The software can switch between through cut and kiss cut automatically if equipped with a double tool holder (vibrating knife + semi‑cut knife) .
Key Considerations
- Printed registration marks – The CCD camera needs clear marks on printed sheets (e.g., circular or crosshair marks) to detect position.
- Material size – Most paper boxes use 1.2×2.4m sheets; confirm your machine table matches.
- Tool selection – Use oscillating knife for thick materials (KT board, cardboard) and kiss knife for adhesive vinyl.
- Crease first, then cut – For folding cartons, use the creasing wheel before cutting to ensure accurate folds.
- Roll vs. sheet – Choose 1625A for rolls, 1625L for sheets.
Summary Table
| Item | Recommendation |
|---|---|
| Software | CCD camera cutting software with registration mark detection |
| Markets | Packaging, advertising |
| Materials | Paper boxes, printed cartons, vinyl stickers, KT board |
| Key hardware | CCD industrial camera, oscillating cutting tool , kisscutting tool , creasing wheel |
| Double tool holder | Recommended for mixed through‑cut + kiss‑cut jobs |
| Machine for paper boxes | 1625L series (1.2×2.4m table) |
| Machine for roll vinyl | 1625A series (feeding system) |
| Creasing tool | For folding paper boxes and gift boxes |
Final Words
CCD camera cutting software takes the guesswork out of cutting printed materials. By reading registration marks and pattern edges, it delivers perfect alignment every time – whether you are cutting cardboard boxes, kiss‑cutting vinyl stickers, or creasing gift boxes.
Pair it with the right machine (1625L for sheets, 1625A for rolls) and the proper tool set (oscillating knife + kiss knife + creasing wheel), and you have a complete solution for the packaging and advertising industry.